circular Interpolation
Abstract: CL484VCD
Text: 15 DRAM Configuration Reference This chapter describes the DRAM configuration reference, a collection of locations in local DRAM that the host may use to monitor and configure the operation of the CL48xVCD and CL484CD-G modules. Both word and byte addresses are given words are 16 bits . The word address is used when accessing locations in the CL48x’s DRAM or ROM
|
Original
|
PDF
|
CL48xVCD
CL484CD-G
CL48x
CHANNEL15
CHANNEL14
CHANNEL13
CHANNEL12
CHANNEL11
CHANNEL10
circular Interpolation
CL484VCD
|
CL484
Abstract: 5-22DRAM 92048 C-Cube microsystems
Text: Contents CL484/480 VideoCD MPEG-1 Audio/Video Decoder User’s Manual 92-0484-101 Introduction 1.1 Overview 1.2 CL48x Features 1.2.1 Flexible Video Interface with High-Quality Video Output 1.2.2 Antialiased Video Overlays 1.2.3 Low Voltage, Low Power Operation in Small Package
|
Original
|
PDF
|
CL484/480
CL48x
CL48xVCD
CL484
5-22DRAM
92048
C-Cube microsystems
|
cl484
Abstract: No abstract text available
Text: 13 Macro Commands The CL48x host software uses macro commands as its primary method of communication with the CL48x. Macro commands are command IDs and argument values written into local DRAM by the host as described in Section 4.2.4 . Each command has a separate command ID and may
|
Original
|
PDF
|
CL48x
CL48x.
cl484
|
scr values
Abstract: No abstract text available
Text: 11 Microcode Features The CL48x performs its higher-level functions by executing microcode on its internal CPU. A summary of the features of CL48x microcode is contained in this chapter. When the input bitstream is either a CD-DA or CD-ROM bitstream, the CL48x microcode can be enabled to either auto-detect the input bitstream or expect bitstreams of one type only.
|
Original
|
PDF
|
CL48x
CL484
scr values
|
0X0220
Abstract: CL480VCD
Text: 12 Initialization The host processor executes an initialization sequence for the CL48x by interacting with the microcode either macro commands or the Configuration Area . For initialization to occur, the microcode must be loaded from ROM by issuing a pulse on the RESET pin.
|
Original
|
PDF
|
CL48x
MCS-86
0x00200
0x00000/0x00000
0X0220
CL480VCD
|
cl9100
Abstract: CL484 CL480 c-cube C-Cube Microsystems CL450 CL480 cl9100 c-cube scr T103 microcode C-CUBE MICROSYSTEMS CL480
Text: 1 Introduction The CL484 is the second generation of C-Cube’s MPEG-1 audio/video decoder chip based on the CL480 architecture. In addition to incorpo rating all existing features of the CL480, the CL484 maintains pin com patibility with the CL480 while providing the following new features:1
|
OCR Scan
|
PDF
|
CL484
CL480
CL480,
16-bit
0x8000
cl9100
CL480 c-cube
C-Cube Microsystems
CL450
cl9100 c-cube
scr T103
microcode
C-CUBE MICROSYSTEMS CL480
|