L6452
Abstract: PQFP100 ink print head driver
Text: L6452 DUAL 13X16 MATRIX HEAD INK JET DRIVER DRIVES TWO 13X16 MATRIX HEADS HEAD TEMPERATURE SENSING POWER UP SYSTEM ELECTRICAL NOZZLE CHECK 8 BIT A/D 5 BIT D/A ± 4KV ESD PROTECTED OUTPUTS DESCRIPTION L6452 is a device designed to drive two 13x16 matrix ink jet printheads in printer applications.
|
Original
|
PDF
|
L6452
13X16
L6452
13x16
PQFP100
ink print head driver
|
mmsz5260bt1g
Abstract: SH2004-DC90A SH3004-DC90A
Text: SH2004-DC90A Printheads Near edge thermal printhead 8dots / mm SH2004-DC90A SH-DC90 series was developed with two key structures step-free and near edge for the packaging printer market which requires high speed continuous printing. It is suitable for printers in factory line where high speed 24 hours continuous
|
Original
|
PDF
|
SH2004-DC90A
SH-DC90
mmsz5260bt1g
SH2004-DC90A
SH3004-DC90A
|
K 2961
Abstract: UDN2961B UDN2961W
Text: 2961 HIGH-CURRENT HALF-BRIDGE PRINTHEAD/MOTOR DRIVER—WITH INTERNAL CURRENT SENSING AND CONTROL UDN2961B VREF 1 IN 2 INPUT 3 V BB CURRENTCONTROL LOGIC 16 SINK OUT 15 EMITTER 14 NC 13 GROUND 12 GROUND GROUND 4 GROUND 5 ENABLE 6 11 LOAD SUPPLY RC 7 10 SOURCE OUT
|
Original
|
PDF
|
UDN2961B
UDN2961B
UDN2961W
UDN2961B/W
K 2961
|
contact image sensor
Abstract: il-z clip 14 pin contact image sensor Contact Image Sensor Head image sensor 14 pin image sensor IA3008-MB30A no2 sensor
Text: IA3008-MB30A Contact image sensor heads Monochrome image sensor head 300dpi IA3008-MB30A The IA3008-MB30A is a state-of-the-art compact, lightweight image sensor head that resulted from the combination of ROHM’s LSI circuit technology and thermal printhead mounting technology. The IA3008-MB30A is perfect for multifunction printers (MFP) or facsimiles that print on normal paper using laser units.
|
Original
|
PDF
|
IA3008-MB30A
300dpi)
IA3008-MB30A
12CLK
contact image sensor
il-z clip
14 pin contact image sensor
Contact Image Sensor Head
image sensor
14 pin image sensor
no2 sensor
|
KF2008-GH40A
Abstract: STB17
Text: KF2008-GH40A Printheads Thick film thermal printhead 8dots / mm KF2008-GH40A The KF2008-GH40A is a standard type A4-size thick-film thermal printhead, developed mainly for facsimiles. !Applications Facsimiles Electric whiteboard Measuring terminal printers
|
Original
|
PDF
|
KF2008-GH40A
KF2008-GH40A
144-bit
10ms/line
STB17
|
OJI KF50
Abstract: OJI KF50-HDA KF2004-GF41A KF50-HDA KF50
Text: KF2004-GF41A Printheads Compact high speed thick film thermal printhead 8dots / mm KF2004-GF41A Using its expertise in LSI technology, ROHM has developed new high density driver chips for use in the KF2004-GF41A . Capable of being employed for both thermal and thermal transfer printing, with a print speed of 200mm/s, the resulting
|
Original
|
PDF
|
KF2004-GF41A
200mm/s,
KF50-HDA
620ms/line
OJI KF50
OJI KF50-HDA
KF2004-GF41A
KF50-HDA
KF50
|
FFC CONNECTOR
Abstract: IC 3950 KF2008-GK11A
Text: KF2008-GK11A Printheads Thick Film Thermal Printhead 8dots / mm KF2008-GK11A The KF2008-GK11A use a high durability protective film to accept top coated label sheet. This is a light and small thick film type thermal printhead which achieved 1 inch / s printing speed.
|
Original
|
PDF
|
KF2008-GK11A
KF2008-GK11A
144-bits
FFC CONNECTOR
IC 3950
|
OJI KF50-HDA
Abstract: KF50 KF3003-GD31A KF50-HDA
Text: KF3003-GD31A Printheads Compact high speed thick film thermal printhead 12 dots / mm KF3003-GD31A Using its expertise in LSI technology, ROHM has developed new high density driver chips for use in the KF3003-GD31A . Capable of being employed for both thermal and thermal transfer printing, with a print speed of 200mm/s, the resulting
|
Original
|
PDF
|
KF3003-GD31A
200mm/s,
KF50-HDA
82ms/line
OJI KF50-HDA
KF50
KF3003-GD31A
KF50-HDA
|
printhead
Abstract: No abstract text available
Text: 新製品 NEW PRODUCT LED PRINT-HEAD カソ-ド分離型ＬＥＤプリントヘッド CATHODE LED PRINTHEAD 特長 Features ・高輝度ＬＥＤ High Brightness LED ・8アノードx24カソード分離 ＬＥＤアレイ 8Anode×24Cathode separation
|
Original
|
PDF
|
24Cathode
printhead
|
KF1502-GT10A
Abstract: KF50-HDA thermal printhead
Text: KF1502-GT10A Printheads Compact low voltage thick film thermal printhead 6dots / mm KF1502-GT10A These compact, lightweight printheads have low power requirements and are intended for ECR and mobile applications. Drawing 7.2V, a maximum print speed of 2 inches per second is possible.
|
Original
|
PDF
|
KF1502-GT10A
KF1502-GT10A
KF50-HDA
thermal printhead
|
KF2003-GK42A
Abstract: KF50-HDA
Text: KF2003-GK42A Printheads Compact medium speed thick film thermal printhead 8dots / mm KF2003-GK42A KF2003-GK42A is suitable for devices, such as high-speed POS and label printer applications, that require thermal printheads capable of higher printing rates. Improved power circuit design means that with heavier current it is possible to
|
Original
|
PDF
|
KF2003-GK42A
KF2003-GK42A
KF50-HDA
|
KF2004-GF41A
Abstract: KF50-HDA
Text: KF2004-GF41A Printheads Compact high speed thick film thermal printhead 8dots / mm KF2004-GF41A Using its expertise in LSI technology, ROHM has developed new high density driver chips for use in the KF2004-GF41A . Capable of being employed for both thermal and thermal transfer printing, with a print speed of 200mm/s, the resulting
|
Original
|
PDF
|
KF2004-GF41A
200mm/s,
KF2004-GF41A
KF50-HDA
|
KF3006-GL50A
Abstract: No abstract text available
Text: KF3006-GL50A Printhead Thick film thermal printhead KF3006-GL50A The new high speed thick-film G-series direct mount clip-pin interconnect with the fast response anti-ESD thermal element and durable new protection film. !Applications High speed label printer
|
Original
|
PDF
|
KF3006-GL50A
150km
KF3006-GL50A
|
GP10
Abstract: KF2003-GF50A KF50-HDA
Text: KF2003-GF50A Printheads Compact low voltage thick film thermal printhead 8dots / mm KF2003-GF50A A world first, ROHM offers the KF2003-GF50A of thermal printheads that allow operation using a single standard lithium ion battery: required voltage has been reduced to just 2.7V. Compact and lightweight they are ideal printheads for
|
Original
|
PDF
|
KF2003-GF50A
KF2003-GF50A
GP10
KF50-HDA
|
|
|
KF2002-GF41A
Abstract: KF50-HDA
Text: KF2002-GF41A Printheads Compact high speed thick film thermal printhead 8dots / mm KF2002-GF41A Using its expertise in LSI technology, ROHM has developed new high density driver chips for use in the KF2002-GF41A . Capable of being employed for both thermal and thermal transfer printing, with a print speed of 200mm/s, the resulting
|
Original
|
PDF
|
KF2002-GF41A
200mm/s,
KF2002-GF41A
KF50-HDA
|
KF2004-GR40A
Abstract: KF50-HDA
Text: KF2004-GR40A Printheads Compact medium speed thick film thermal printhead 8dots / mm KF2004-GR40A The KF2004-GR40A is ideal for applications that require compact, lightweight thermal printheads, such as POS and label printer applications. The 2-, 3-, and 4-inch sizes have a resolution of 203dpi. This series is suitable for a wide range of
|
Original
|
PDF
|
KF2004-GR40A
KF2004-GR40A
203dpi.
100mm/s,
KF50-HDA
|
KF2006-GL50A
Abstract: No abstract text available
Text: KF2006-GL50A Printhead Thick film thermal printhead KF2006-GL50A The new high speed thick-film G-series direct mount clip-pin interconnect with the fast response anti-ESD thermal element and durable new protection film. !Applications High speed label printer
|
Original
|
PDF
|
KF2006-GL50A
150km
KF2006-GL50A
|
192bit
Abstract: KA2003-BE10A KF50 KF50-HDA
Text: KA2003-BE10A Printheads Compact Battery drivable thick film thermal printhead 8dots / mm KA2003-BE10A Compact and lightweight they are ideal print heads for handheld printers and PDAs (personal digital assistants). zApplications Mobile printers EFT-POS printers
|
Original
|
PDF
|
KA2003-BE10A
192bit
KA2003-BE10A
KF50
KF50-HDA
|
SE3004-DC90A
Abstract: No abstract text available
Text: SE3004-DC90A Tentative Printhead Under development High speed thermal printhead 300 dots / inch SE3004-DC90A High speed, high quality, and high durability are achieved by using step free structure with high performance partial glaze and highly conductive overcoat layer. SE300*-DC90A series are lined up which can accommodate with all types of
|
Original
|
PDF
|
SE3004-DC90A
SE300
-DC90A
300mm/s)
SE3004-DC90A
|
SH3002-DC70A
Abstract: ROHM thermal printer head 203
Text: SH3002-DC70A Printheads Near edge thermal printhead with thermal historical control SH3002-DC70A SH-DC70 series was developed with two key structures step-free and near edge for the packaging printer market which requires high speed continuous printing. It is suitable for printers in factory line where high speed 24 hours continuous
|
Original
|
PDF
|
SH3002-DC70A
SH-DC70
SH3002-DC70A
ROHM thermal printer head 203
|
contact image sensor
Abstract: "contact image sensor" light sensor Thermal Imaging sensor body temperature sensor Dispersion Contact Image Sensor Head SENSOR TECHNOLOGY ia2008-mb10a thermal head
Text: Contact image sensor heads Monochrome image sensor head 8 pixel / mm IA2008-MB10A The IA2008-MB10A is a state-of-the-art compact, lightweight A4-size monochrome image sensor head that resulted from the combination of ROHM’s LSI circuit technology and thermal printhead mounting technology.
|
Original
|
PDF
|
IA2008-MB10A
IA2008-MB10A
contact image sensor
"contact image sensor"
light sensor
Thermal Imaging sensor
body temperature sensor
Dispersion
Contact Image Sensor Head
SENSOR TECHNOLOGY
thermal head
|
Untitled
Abstract: No abstract text available
Text: BiMOS U 32-BIT SERIAL-INPUT, LATCHED DRIVERS Intended originally to drive thermal printheads, Types UCN5832A and UCN5832EP have been optimized for low output-saturation voltage, high-speed operation, and pin configurations most convenient for the tight space requirements of high-resolution printheads. The
|
OCR Scan
|
PDF
|
32-BIT
UCN5832A
UCN5832EP
16-bit
|
128064
Abstract: No abstract text available
Text: Printheads High Speed Thermal Printhead 300 dots/inch NB3004-VB10A The NB3004-VB10A is a flat thin film thermal printhead that supports medium speed and high speed printing, suited for general purpose compact printers as well as label printers. •A pplica tio n s
|
OCR Scan
|
PDF
|
NB3004-VB10A
NB3004-VB10A
NB2004-VB10A
128064
|
NB3004-WA10A
Abstract: ST82
Text: Printheads Super High Speed Thermal Printhead 300 dots/inch NB 3004 -WA10 A The NB3004-WA10A is a flat thin film thermal printhead with our state-of-the-art heat history control technology, suited for high speed label printers. •A pplications High definition bar code label printers
|
OCR Scan
|
PDF
|
NB3004-WA10A
NB3004-WA1
NB3004-VA10A
NB3004-WA10A
ST82
|
